Filter
Top Products
• RS-232 control port — Using serial commands, the DVS 605 can be controlled and
configured via the embedded web pages, or integrated into a control system. Extron
products use the SIS ‑ Simple Instruction Set command protocol, a set of basic ASCII
code commands that allow for quick and easy programming.
• Front panel USB configuration port — Enables easy configuration without having to
access the rear panel.
• Contact closure ports — These can be used for external control of source
switching.
• Rack-mountable — The DVS 605 has a 1U, full rack width metal enclosure.
• LockIt HDMI cable lacing brackets — These brackets are included and are used to
secure HDMI cables to the device.
• Internal universal power supply — The 100‑240 VAC, 50‑60 Hz, international
power supply provides worldwide power compatibility.
Controlling the DVS 605
All DVS 605 Series units can be controlled using one or more of the following methods:
• The front panel controls.
• A computer, a touch screen panel, or any other device that can send and receive
serial communications through the USB, RS‑232 or Ethernet port. The Extron Simple
Instruction Set (SIS) is a set of simple keystroke commands that can be used with any
such devices.
• Embedded web pages provide a web browser‑style interface for controlling the scaler
from a computer over a LAN network.
• Hardwired IR.
• Ethernet control via IP Link, enabling the scaler to be controlled and actively
monitored over a LAN, WAN, or the Internet.
DVS 605 • Introduction 6