Filter
Top Products
• AFL - Accu-RATE Frame Lock — A patented technology exclusive to Extron that
eliminates image tearing caused by frame rate conversion.
• Image freeze control — A live image can be frozen using control via USB, RS‑232
serial, Ethernet, or IR control.
• Auto-Image setup — When activated, the unit automatically detects the resolution of
the incoming video signal and sets the total pixels, active pixels, and active lines, as
well as the horizontal and vertical starting points.
• Auto Input Memory — When activated, the DVS 605 automatically stores size,
position, and picture settings based on the incoming signal. When the same signal is
detected again, these image settings are automatically recalled from memory.
• On-screen display — The DVS 605 features an on‑screen display that displays
status information of the currently selected input.
• On-screen input labels — An on‑screen text label may be assigned to each input.
The label can be up to 16 characters and input via RS‑232 or Ethernet.
• Power screen saver mode and standby modes — The DVS 605 can be set to
automatically mute video and sync output to the display device when no active input
signal is detected. This allows the projector or flat‑panel display to automatically enter
into standby mode to save energy and enhance lamp or panel life.
• Picture controls — These include brightness, contrast, color, tint, and detail, as
well as horizontal and vertical positioning, and sizing. 16 user memory presets are
available for each input to store all image settings.
• Automatic 3:2 and 2:2 pulldown detection — The DVS 605 offers advanced film
mode processing techniques that help maximize image detail and sharpness for
NTSC, PAL, and HDTV 1080i sources that originated from film.
• Motion adaptive 1080i and SD de-interlacing — The DVS 605 provides high
performance de‑interlacing for 1080i and standard definition signals from sources
including cable or satellite set‑top boxes, delivering optimized image quality through
advanced motion compensation.
• Aspect ratio control — The aspect ratio of the video output can be controlled by
selecting a Fill mode, which provides a full screen output, or a Follow mode, which
preserves the original aspect ratio of the input signal.
• Quad standard video decoding — The DVS 605 uses a digital, 3D adaptive comb
filter to decode NTSC 3.58, NTSC 4.43, PAL, and SECAM signals for integration into
systems worldwide.
• Internal test patterns for calibration and setup — The DVS 605 offers 14 test
patterns; crop pattern, crosshatch, 16 bar grayscale, color bars, alternating pixels,
ramp, white field, 4 x 4 crosshatch, and four aspect ratio patterns – 1.33, 1.78, 1.85,
and 2.35.
• Optional 3G/HD-SDI output with genlock — This output complies with SMPTE
292M and 424M, and ITU digital video standards. Genlock allows synchronization to
an external reference signal for integration into broadcast and production applications.
• Front panel security lockout — This feature locks out all front panel functions
except for input selection; all functions however, are available through USB, RS‑232,
or Ethernet control.
• Hardwired IR connection — The DVS 605 features a rear panel hardwired IR port
for connection to Extron MediaLink Controllers, IP Link Control Processors, or IR
receivers for additional control flexibility.
• Ethernet monitoring and control — The DVS 605 can be controlled and proactively
monitored over a LAN, WAN, or the Internet. An intuitive web interface is included for
setup and control.
DVS 605 • Introduction 5