Sony DMX-R100 Stereo Amplifier User Manual


 
87
Chaper 4 Operation Tips
Chapter 4 Operation Tips
For System Setup
Changing the Keyboard Type
The DMX-R100 is factory-preset for use with a Japanese type keyboard.
Select the desired keyboard type as described below.
1 Turn on the power of the DMX-R100.
Loading Now........ appears.
2 While the numbers of dots on the screen is increasing, press [K] on the
keyboard currently connected.
The following dialogue appears;
Do you want to change the keyboard type?
f : French keyboard (fr_FR_102.kbd)
g : German keyboard (de_DE_102.kbd)
j : Japanese keyboard (ja_JP_106.kbd)
u : US keyboard (en_US_101.kbd)
other : Dont change the keyboard type.
3 Touch the character of the desired keyboard type; f, g, or u.
The keyboard type indication on the bottom left of the window
changes to the one selected.
Updating the DMX-R100 System
When you turn on the power of the DMX-R100, the starting-up window
opens.
After the starting-up window closed once, the bar indication [] starts to
blink on the left top of the LED window.
While the bar indication [] is blinking, if you press the ESC key on the
external key board, the following dialogue appears:
Will you update this system? (y/n)
If the above dialogue appears on the window, be sure to select N.
The system starts as usual.
WARNING
If you press y on the key board, without having the floppy disks for
updating system, the DMX-R100 system files may be damaged.
If you need update the system, contact your nearest Sony dealer.
Chapter 4 Operation Tips