Sony DMX-R100 Stereo Amplifier User Manual


 
113
Appendix
Appendix
Another audio characteristics
Characteristics
Frequency response
Harmonic distortion
Noise level
Crosstalk
Dynamic range
A to D converter
D to A converter
Total delay
Specifications
Line input (LINE IN to PGM OUT) 20 Hz to 20 kHz, ±0.2 dB
Mic input (MIC IN to PGM OUT) 20 Hz to 20 kHz, ±0.3 dB
Line input (LINE IN to PGM OUT) 0.01 %, at + 4 dBs, 1 kHz
Mic input (MIC IN to PGM OUT) 0.1 %, at - 60 dBs, 1 kHz
Mic input -104 dBu, 600 terminated (-80 dBµ, 4 dB standard)
Mic input -126 dBu, 150 terminated
Between input and output channels 90 dB at 1 kHz
Line input (LINE IN to PGM OUT) 104 dB
24-bit, ×128 oversampling
24-bit, ×128 oversampling
2.5 ms (Between LINE IN and PGM OUT)Fs = 48 kHz
Automation Function
Item
Title
Title configuration
Snapshot automation
Dynamic automation
Fader resolution
Contents
Contents of title
Number of title configuration
Number of snapshot automation
Storage
Contents of title configuration
Number of snapshots
Number of MIDI events
Number of cue points
Number of events per cue point
Size of snapshot
Memory
Time accuracy of cue linked event
Contents of snapshots
Buffer size
Number of temporary buffers
Event size
Memory
Time accuracy
Contents of dynamic automation
a)
Title configuration, snapshot automation, mix (saved dynamic
automation)
×1
×1
Built-in flash memory or floppy disk
FS, Initial snapshot, Timecode mode, Output
99 max.
99 max.
99 max.
1
8 kbyte/snapshot
Dynamic RAM
a)
± 2 frames
Input router, delay, phase, trimming, input mode, filter, equalizer,
dynamics, pan, assign, cut, fader, AUX
1 M byte
2 (A and B)
12 bytes/effective frame (min)
Dynamic RAM
a)
± 2 frames
Filter, equalizer, dynamics, pan, assign, cut, fader, AUX
10-bit (1024 steps)
a) When you turn off the power of the unit, or start the unit without performing KEEP operation, the automation
data will be cleared.