Filter
Top Products
102
Chaper 4 Operation Tips
Chapter 4 Operation Tips
For example, by releasing the CUT button, the data and audio signals are
changed as follows.
1 When you press the CUT button, the audio signal status is held with
the ON trigger and LEDs and ON/OFF status are inverted.
2 As long as you hold down the CUT button, the audio signal status in
step 1 is held and the displays change according to the automation
operation.
3 When you release the CUT button, the audio signal status is adjusted to
the display status with the OFF trigger.
The audio signal status in steps 1 to 3 is stored as automation data.
Time
Time
Press
Release
When shifting the stored Cut
ON/OFF timing to an earlier
time:
ON/OFF of the CUT button:
When shifting the stored Cut ON/
OFF timing to a later time:
Press the button before the change and
release the button after timing.
Time
Time
When cancelling the stored Cut
ON/OFF:
Press the button before the change, then
release the button after the change has
been completed.
ON
trigger
OFF
trigger
Basic Operation Procedure
Cut data previsouly stored.
Cut data currently stored.