Filter
Top Products
228
Chapter 9 Operation and Maintenance
CPU disable! CPU is no longer available for
the operating system.
The CPU is abnormal. Contact an office listed in the "Contact
Information" of "Start Guide".
Invalid System Configuration Data Change [Reset Configuration Data] on "8.2.5 Advanced Menu"
(pg.199) to [Yes] in the BIOS Setup Utility. If the message
still appears, contact an office listed in the "Contact
Information" of "Start Guide".
Resource Conflict System resources (IRQs, DMA channels, or I/O port addresses)
conflict.
Start up the BIOS Setup Utility again and check the system
resource settings.
"8.2 BIOS Setup Utility" (pg.191)
If the message still appears, contact an office listed in the
"Contact Information" of "Start Guide".
IRQ not configured Check the settings on the BIOS Setup Utility. If the message still
appears, replace the expansion card. If the message still appears,
contact an office listed in the "Contact Information" of "Start
Guide".
Expansion ROM not initialized On the screen, check the expansion card or device being
initialized. Replace the card. If the message still appears, contact
an office listed in the "Contact Information" of "Start Guide".
Allocation error static node # An onboard device or expansion card is abnormal. Replace the
device or expansion card. If the message still appears, contact an
office listed in the "Contact Information" of "Start Guide".
Baseboard Management Controller has
detected an error
Check the system event log and replace the abnormal option.
A temperature has exceeded the warning
threshold
Temperature is abnormal.
Check and improve the environment. If the message still
appears, contact an office listed in the "Contact Information" of
"Start Guide".
A temperature has exceeded the critical
threshold
CPU fan speed has exceeded the warning
threshold
A CPU fan is abnormal.
Check for objects hindering CPU fan rotation. If the message
still appears, contact an office listed in the "Contact
Information" of "Start Guide".
CPU fan speed has exceeded the critical
threshold
System fan speed has exceeded the warning
threshold
A system fan is abnormal.
Check for objects hindering system fan rotation. If the message
still appears, contact an office listed in the "Contact
Information" of "Start Guide".
System fan speed has exceeded the critical
threshold.
Power supply fan speed has exceeded the
warning threshold.
A power supply unit fan is abnormal.
Check for objects hindering power supply unit fan rotation. If
the message still appears, contact an office listed in the "Contact
Information" of "Start Guide".
Power supply fan speed has exceeded the
critical threshold.
System board voltage has exceeded the critical
threshold.
Turn the server off and unplug the power cables from the server.
Turn the server back on. If the message still appears, the
baseboard must be replaced. Contact an office listed in the
"Contact Information" of "Start Guide".
System Event Log utilization has exceeded the
warning threshold. Please save the System
Event Log to a different media and clear it
afterwards.
There is no space for system event logs.
Swap or delete logs as necessary.
"9.3 System Event Log" (pg.239)
table: List of POST Errors
Message Contents