Filter
Top Products
156
Chapter 6 High Reliability Tools
6.1 RAID Management Tool (Global
Array Manager)
RAID Management Tool is software that perform array configuration, disk initialization
and disk array monitoring when using RAID card. For more details, refer to
"PRIMERGY ServerBooks" supplied with the server, and "Supplement" supplied with
the RAID card.
Batch installation using ServerStart
When an OS is installed using ServerStart, RAID Management Tool is batch installed the OS and other
high reliability tools. If manually installing the OS, install RAID Management Tool manually.
6.1.1 Installing RAID Management Tool (Global Array
Manager)
To install RAID Management Tool individually using the standard installer, following the procedures
below.
These tool can be installed only when the server has a RAID card.
Before performing Global Array Manager, check that TCP/IP is installed and works properly.
1 Log on to the server with administrator privileges.
Exit all programs before starting installation.
Installation will fail if "Event Viewer" or "Computer Management" is run.
2 Insert the ServerStart CD-ROM. Click [Start] → [Run...].
3 Enter a name in the [Open:] field as follows and click [OK].
[CD-ROM drive]:\PROGRAMS\GENERAL\LSI\GAM\install.bat
Installation starts and the wizard window appears.
For subsequent procedures, refer to "PRIMERGY ServerBooks" supplied with the server, and
"Supplement" supplied with the RAID card.