Filter
Top Products
212
Chapter 8 Hardware Configuration/Utilities
■ LAN Settings Submenu
These menu items are fixed on this server. If you need to configure the LAN setup including IP
addresses, refer to "9.3.4 Before Using the Remote Control Service" (pg.242) and use the Server
Management Tools.
8.2.13 CPU Status Submenu
Appears when [CPU Status] is selected from the [Server] menu.
This submenu sets whether or not to allow the use of the installed CPU.
System Event Log
(List mode)
[Enter] Lists the contents of the system event log.
For details on contents, refer to "9.3 System Event Log"
(pg.239).
Realtime Sensor Data [Enter] Displays temperature and voltage sensor data.
LAN Settings [Enter] Performs LAN settings to enable remote operations using
Remote Control Service.
"
■ LAN Settings Submenu" (pg.212)
table: Items on the CPU Status Submenu
Item Setting Description
CPU Status • Enabled (at the time of
purchase)
• Disabled
• Failed
Sets whether or not to allow the use of CPUs
installed in the CPU sockets. This must not be set to
[Disabled] or [Failed].
table: Items on the IPMI Submenu
Item Setting Description
Item Specific Help
PhoenixBIOS Setup Utility
Server
CPU Status [Enabled]
CPU Status
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values-/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit