Filter
Top Products
174
Chapter 7 Installing Internal Options
7.4.3 How to Install an Expansion Card
1 Turn off the power and remove the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.164)
2 Touch a metal part of the server to discharge static electricity.
3 Unplug the cable from the SCSI or RAID card installed in Slot 1.
Unplug the SCSI cable and the hard disk access LED cable.
4 Loosen the screws on the rear side of the server, and remove the card locking
frame.
Hard disk access LED cable
SCSI cable
Card locking frame
Screw
Screw