Filter
Top Products
177
PRIMERGY RX100 S2 User’s Guide
7
Installing Internal Options
7.5 Installing an Internal CD-ROM
Drive Unit
This section explains the procedure for installing a CD-ROM drive (optional).
7.5.1 Installable CD-ROM Drive Units
The following CD-ROM drive units can be installed on this server.
Package
Before installing the internal CD-ROM drive unit, refer to "Appendix B.2 Internal CD-ROM Drive Unit
Specifications" (pg.262) to check the contents of the package.
• Before installation or removal, turn off the server and all peripheral devices.
Also unplug all power cables from the server. Failure to do so can cause
electric shock ("1.4.3 Turning Off the Server" (pg.31)).
• When installing a CD-ROM drive, hold it by the side. Applying force to the top
can cause failures.
• The circuit boards and soldered parts of internal options are exposed. They
can be damaged by static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas
or the edges of the circuit boards.
table: Installable CD-ROM Drive Units
Product name Model name Remarks
CD-ROM ATAPI PG-CD320 IDE (ATAPI)