Filter
Top Products
199
PRIMERGY RX100 S2 User’s Guide
8
Hardware Configuration/Utilities
8.2.5 Advanced Menu
Configures peripheral and PCI devices.
table: Items on the Advanced Menu
Item Setting Description
Peripheral Configuration [Enter] Configures the serial port, parallel port, etc.
"8.2.6 Peripheral Configuration Submenu"
(pg.200)
PCI Configuration [Enter] Configures the PCI device.
"8.2.7 PCI Configuration Submenu" (pg.202)
Advanced System
Configuration
[Enter] Configures additional settings.
"8.2.8 Advanced System Configuration
Submenu" (pg.204)
Power On/Off [Enter] Configures power On/Off settings.
"8.2.9 Power On/Off Submenu" (pg.206)
Reset Configuration Data • Yes
• No (at the time of
purchase)
Sets the initialization of the Extended System
Configuration Data (ESCD) where the system
resources are recorded.
This setting is changed to [No] whenever the
system is restarted.
Secured Setup
Configurations
No (Fixed parameter) Sets whether or not to reject setting changes made
by the Plug&Play OS.
Multiprocessor
Specification
1.4 (Fixed parameter) Sets the version of the multiprocessor to use.
Windows 2003 EMS
Function
• Disabled
• Enabled (at the time of
purchase)
Sets whether to enable or disable the EMS
functions.
Large Disk Access Mode DOS (Fixed parameter) Sets the hard disk access type supporting large-
capacity hard disk drives.
Item Specific Help
Setup Warning
PhoenixBIOS Setup Utility
Main Advanced Security Server Exit
Setting items on this menu to incorrect
values may cause your system to malfunction.
Peripheral Configuration
PCI Configuration
Advanced System Configuration
Power On/Off
Reset Configuration Data: [No]
Secured Setup Configurations: [No]
Multiprocessor Specification: [1.4]
Windows 2003 EMS Function: [Enabled]
Large Disk Access Mode: [DOS]
S-ATA Interface: [Enabled]
S-ATA Mode: [Legacy IDE]
LSI SATA RAID: [Disabled]
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values-/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit