Filter
Top Products
211
PRIMERGY RX100 S2 User’s Guide
8
Hardware Configuration/Utilities
8.2.12 IPMI Submenu
Appears when [IPMI] is selected from the [Server] menu.
Configures the Baseboard Management Controller (BMC).
table: Items on the IPMI Submenu
Item Setting Description
IPMI Specification
Version
- Displays the IPMI Specification version.
BMC Firmware - Displays the BMC Firmware version.
Clear System Event
Log
• Disabled (at the time
of purchase)
• Enabled
Deletes the logs stored in the system event log.
Event Log Full Mode • Overwrite (at the
time of purchase)
•Maintain
Configures the log when full System Event Log is
indicated.
• Overwrite: Logs are overwritten in old to new order.
• Maintain: Existing logs are maintained. No new logs are
recorded.
Note:
Before changing the setting for this item, be sure to
use [Clear System Event Log] to delete the system
event log.
Existing Event Log
number
- Displays the number of recorded logs.
Remaining Event Log
number
- Displays the number of remaining logs that can be
recorded.
System Event Log [Enter] Displays the contents of the system event log.
For details on contents, refer to "9.3 System Event Log"
(pg.239).
PhoenixBIOS Setup Utility
Item Specific Help
IPMI Specification Version n.n
BMC Firmware n.nn.nnnnnnnn
Clear System Event Log [Disabled]
Event Log Full Mode [Overwrite]
Existing Event Log number nnn
Remaining Event Log number nnn
System Event Log
System Event Log (list mode)
Realtime Sensor Data
LAN Settings
IPMI
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values-/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit
Server