Filter
Top Products
Password Page
This page allows the user to set an administrator and user password on the device.
Click on this button
to open the page.
Figure 62. Password Page
Administrators and users can view any setting on the device. Administrators have the
ability to make adjustments to any setting. Users can only make changes to the following:
• Input Selection • PIP Preset Recall • Auto-Image • PIP On/Off • User Preset Recall
• Auto + Fill • Auto + Follow • PIP Swap • Input Preset Recall • Aspect Ratio • Volume
• Audio Mute • Freeze • Video Mute
NOTE: If the DVS 605 is password-protected, a user name entry is required for
connection. Enter admin for administrator-level access or user for user-level
access. These user names must be entered in lowercase characters. After
entering the appropriate user name, enter the associated password in the
Password field.
To create or change an administrator password:
1. In the Administrator Password field, enter the desired administrator password.
2. In the Confirm Password field, re-enter the administrator password.
3. Click Save.
To create the user password:
NOTE: User password cannot be set until an administrator password has been entered.
1. In the User Password field, enter the desired user password.
2. In the Confirm Password field, re-enter the user password.
3. Click Save.
NOTE: When passwords are set, a notication to close and restart the browser appears.
DVS 605 • Using the Default Web Pages 90