Filter
Top Products
On Screen Display Message
When the selected On Screen Display message shows the name of the current input and
the detected input signal. The message is displayed for a user-dened duration (1-501
seconds) after an input switch.
To set the On Screen Display to display messages:
1. Select the Enable On Screen Display check box.
2. Adjust the duration that messages are displayed on screen, click the up > and down <
arrows, or enter a value in the Duration on Screen field.
NOTE: Setting this value to zero disables the On Screen Display Message.
To disable the On Screen Display message, clear the Enable On Screen Display
check box or set the duration to zero.
Auto Switch
When enabled, the auto-input switching priority can be set to either start with the highest
active input or the lowest active input.
To enable auto-input switching:
1. Select the Enable Auto Switch check box.
2. Select the desired priority option radio button. Either:
a. Priority to highest active input number, or:
b. Priority to lowest active input number.
To disable the auto-input switching option clear the Enable Auto Switch check
box.
DVS 605 • Using the Default Web Pages 84