Filter
Top Products
To set audio to follow the main input, clear the Audio Follows PIP check box.
To disable IR control, select the Disable IR Control check box.
To re-enable IR control, clear the Disable IR Control check box.
HDCP Notication
HDCP notication indicates if HDCP content restrictions are preventing a video signal from
passing.
When the Green option is selected, a green screen with HDCP CONTENT text is displayed
on the output if the connected device is not HDCP compliant and an HDCP input has been
selected.
When the Black option is selected, the output mutes to black if the connected device
is not HDCP compliant and an HDCP Authorized input with protected content has been
selected.
To select the display color select the Black radio button or Green radio button.
Screen Saver Settings
When no active video is detected on the selected input, the screen saver mode is
activated. The output sync can be disabled after a user-set duration, which allows display
devices to go into a low power, standby state.
To set the screen saver options:
1. Click the Black (default) or the Blue with OSD bug radio buttons to enable the
desired screen saver background color.
• Black — Mutes the video output to black for a set duration before disabling the
output sync.
• Blue with OSD bug — Displays a blue background with a moving OSD bug
that indicates”DVS 605: Input X No Signal” for a set duration before disabling the
output sync.
2. Adjust the duration of the screen saver to either:
a. No screen saver (never disable output sync), by clicking the Never radio button;
or
b. To a user-dened duration (1-500 seconds), by clicking the radio button for the
duration field and then click the up > and down < arrows. Alternatively enter a
value in this field.
NOTE: Setting this value to 0 disables the output sync immediately when no
active input is detected.
DVS 605 • Using the Default Web Pages 83