Filter
Top Products
• Integrated audio delay — The audio output is automatically delayed to compensate
for latency introduced by the video processing. An additional audio delay can also be
adjusted to a user defined setting.
• HDMI audio embedding and de-embedding — For DVS 605 models with audio,
analog input audio signals can be embedded onto the HDMI output signal.
The DVS 605 can also extract PCM embedded HDMI audio signals. Encoded bitstream
audio for Dolby
®
Digital or DTS
®
Digital Surround a can be passed to the HDMI and
S/PDIF outputs.
General
• HDCP compliance — features include data rates up to 6.75 Gbps, Deep Color, and HD
lossless audio formats.
• HDCP authentication and signal presence conrmation via RS-232 or Ethernet — The
DVS 605 provides real-time verication of HDCP status for each digital video input and
output. This allows for signal and HDCP verication through USB, RS-232, or Ethernet,
providing feedback to a system operator or helpdesk support staff.
• HDCP visual conrmation provides a green signal when encrypted content is sent to a
non-compliant display, providing immediate visual confirmation that protected content
cannot be viewed on the display.
• Key Minder continuously veries HDCP compliance for quick, reliable switching. It
authenticates and maintains continuous HDCP encryption between input and output
devices to ensure quick and reliable switching while enabling simultaneous distribution
of a single source signal to one or more displays.
• Advanced scaling engine — The DVS 605 features a high performance 30-bit scaling
engine with the ability to scale high resolution computer-video and HDTV as well as
standard definition video up or down in resolution.
• EDID Minder automatically manages EDID communication between connected
devices, ensuring all sources power up properly and reliably output content for display.
• AFL
™
- Accu-RATE Frame Lock — A patented technology exclusive to Extron that
eliminates image tearing caused by frame rate conversion.
• Image freeze control — A live image can be frozen using control via USB, RS-232
serial, Ethernet, or IR control.
• Auto-Image
™
setup — When activated, the unit automatically detects the resolution
of the incoming video signal and sets the total pixels, active pixels, and active lines, as
well as the horizontal and vertical starting points.
• Auto Input Memory — When activated, the DVS 605 automatically stores size,
position, and picture settings based on the incoming signal. When the same signal is
detected again, these image settings are automatically recalled from memory.
• On-screen display — The DVS 605 features an on-screen display which displays status
information of the currently selected input.
• On-screen input labels — An on-screen text label may be assigned to each input. The
label can be up to 16 characters and input via RS-232 or Ethernet.
• Power screen saver mode and standby modes — The DVS 605 can be set to
automatically mute video and sync output to the display device when no active input
signal is detected. This allows the projector or at-panel display to automatically enter
into standby mode to save energy and enhance lamp or panel life.
DVS 605 • Introduction 4