Filter
Top Products
Connection Settings
This opens a separate window that allows the user to adjust the settings for RS-232
communication and Ethernet communication to the device.
Figure 37. Connection Settings Window
RS-232 Settings — To change the settings select the appropriate value within the drop
down boxes for each field: Baud rate, Stop Bits, Bits, and Parity.
Ethernet Settings — To change the settings enter select the appropriate addresses within
the each field: IP Address, Subnet Mask, and Default Gateway. Click Use
DHCP if an IP address is to be obtained automatically.
When proposed changes have been entered for either RS-232 or Ethernet connections,
click Save. The device is updated with the new settings.
Date and Time
This opens a separate window, that allows the user to adjust the date and time settings.
Figure 38. Date and Time Settings Window
Either click the Sync button to sync the date and time of the unit to that of the
connected PC, or manually adjust the date and time using the Date drop-down calendar
and the Time field.
Click Save when changes have been completed.
DVS 605 • Using Extron Congurator 60