Filter
Top Products
X2! = Analog output polarity:
0 = H-/V- (default)
1 = H-/V+
2 = H+/V-
3 = H+/V+
X2@ = Analog output sync format:
0 = RGBHV (default)
1 = RGBS
2 = RGsB
3 = Y, R-Y, B-Y bi-level
4 = Y, R-Y, B-Y tri-level
X2# = User presets or PIP presets — 1 to 16
X2$ = Input presets — 1 to 128
X2% = On-screen menu time-out or screen saver sync timeout, (default = 3 seconds)/ output sync
time-out (default = 501 - never)
0 = OSD never displayed/output sync is instantly disabled with no active input,
1 to 500, in 1 second increments,
501 = OSD never times out, output sync is never disabled
X2^ = Executive mode status:
0 = Off/disable, (default)
1 = Exec Mode 1 — Complete front panel lockout
2 = Exec Mode 2 — Partial front panel lockout (only input selection, Auto-Image, and
PIP/Swap are still available)
X2& = PIP window input selection: 0 to 4 (0 = Off). (Input 5 not available for PIP mode)
X2* = Overscan (applied to SMPTE [NTSC, PAL, 480p, 576p, 720p, 1080i, 1080p] input rates):
0 = 0.0% (default for RGB) — a “true” Auto-Image will be executed on SMPTE inputs.
1 = 2.5% (default for YUV Auto, RGBcvS) — an Auto-Image command snaps to a 2.5% table;
no true Auto-Image.
2 = 5.0% (default for composite video and S-video) — an Auto-Image command snaps to a
5.0% table; no true Auto-Image.
X2( = Aspect ratio:
1 = Fill: each input rate will automatically fill the entire output raster (default)
2 = Follow: each input rate will be displayed with its native aspect ratio
X3) = Screen saver mode:
1 = Black screen (default)
2 = Blue screen with OSD text
X3! = Video mute;
0 = Off/disable
1 = On/enable (mute to black)
2 = mute output sync and video
X3@ = Auto-Image threshold value, 0 (black) though 100 (white), default = 25
X3# = HDCP status (valid only on HDMI/DVI outputs):
0 = No sink or source detected
1 = Sink or source detected with HDCP
2 = Sink or source detected but no HDCP is present
X3$ = Video switching effect:
0 = Cut
1 = Dissolve (default)
DVS 605 • SIS Communication and Control 31