Filter
Top Products
Output Conguration Panel
The right panel consists of user configurable fields for video outputs. These include: output
resolution, refresh rate, signal format and sync polarity for the analog output, and signal
format for the digital output. The switch transition mode between inputs can be set, and
a test pattern selection is available for use in calibrating a connected display. The genlock
settings can also be set on all models.
Figure 45. Input Configuration Panel
Resolution
Click on the arrow and from the drop-down list box select the applicable output
resolution. The selectable resolutions include five user customizable ones: C1-C5.
See the resolution and refresh rate table for a full list. Default is 720p/60 Hz
Refresh rate
Click on the arrow and from the drop-down list box select the applicable refresh rate.
Analog signal format
Click on the arrow and from the drop-down list box select an applicable signal format.
Selectable formats are: RGBHV (default), RGBS, RGBcvS, (Y, R-Y,B-Y bi-level), and
(Y, R-Y,B-Y tri-level).
Analog sync polarity
Click on the arrow and from the drop-down list box select the applicable sync polarity,
Choices are: H-/ V- (default), H+/ V-, H+/ V+, H-/ V+.
NOTE: The sync polarity option is only available when the output format is RGBHV.
DVS 605 • Using the Default Web Pages 69