Filter
Top Products
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Reset commands
Erase user supplied
web pages and
files
24 28
E<filename>EF} Del•<filename>]
Erase named les.
Erase current
directory and
files
24 28
E/EF} Ddl]
Erase current directory and its les.
Erase current
directory and
subdirectories
24 28
E//EF} Ddl]
Erase current directory and its
subdirectories.
Erase ash
memory
24
EZFFF} Zpf]
Erase the ash memory.
Reset all device
settings to factory
default settings
24
EZXXX} Zpx]
Retains Ethernet settings
Absolute system
reset
24
EZQQQ} Zpq]
Includes resetting networking to DHCP =
ON.
Absolute system
reset (but retain IP)
24
EZY} Zpy]
NOTE: This reset EZY is similar to ZQQQ but excludes IP address, subnet mask, gateway addresses, unit name,
DHCP setting, and port mapping (telnet/web/direct access) in order to maintain communications with device.
Recommended after a firmware update.
Information request
General information
I/i
Vid
X!•AudX!•VtypX#•StdX1)•BlkX1)•HrtX1#•VrtX1#
•PipX!]
NOTE: Aud “X!” response is a “-” on the non audio model. “Vtyp” returns to the detected input type (X!*\) .
Query firmware
version
Q/q
x.xx
]
View rmware version.
Query full firmware
version
*Q/*q
x.xx.xxxx
]
View full rmware version details.
Query part number
N/n
zz-zzz-zz
]
View part number.
View internal
temperature
E 20STAT} Stat20•X1!]
Temperature in degrees Celsius.
NOTE: X! = Input selection, 1 to 5
X# = Input video format, 0 = No signal detected (only valid for detected input format query, such as X!*\), 1 = RGB,
2 = YUV Auto, 3 = RGBcvS, 4 = S-video, 5 = Composite, 6 = DVI/HDMI (Only available for IN3, IN4, and IN5)
X1) = Input standard, 0 = No signal detected (current input), 1 = NTSC 3.85, 2 = PAL, 3 = NTSC 4.43, 4 = SECAM
- = N/A (occurs when input is an active RBG, YUV Auto [but not NTSC/PAL], or HDMI signal
X1! = Internal temperature (in degrees Celsius)
X1# = Horizontal and vertical frequencies (format is three digit with single decimal and leading zeros for example, 075.3)
DVS 605 • SIS Communication and Control 47