Filter
Top Products
Picture Control
This section shows the image settings for the selected input. These include brightness,
contrast, color, tint, and detail, and can be adjusted and applied to that input.
To adjust the picture settings click and drag the associated slider for any image setting
(brightness, contrast, color, tint, or detail) to the desired value.
Alternatively, you can enter a value within the field associated with the image setting, or
click the up > and down < arrows and change the value in the field.
User Presets
In this section of the Image Settings page, the user can save or recall up to 16 user presets
per input channel for the currently active input. The user presets contain only picture
control properties.
Settings Included Within Presets
Setting User Preset Input Preset PIP Preset Auto Memory
H/V Start Yes Yes
Active Pixels Yes Yes
Active Lines Yes Yes
Total Pixels Yes Yes
Phase Yes Yes
Brightness and Contrast Yes Yes Yes
Color and Tint Yes Yes Yes
Detail Yes Yes Yes
Input Type Yes
Audio Input Gain
and Attenuation
Yes
Main Image/Window
Size and Position
Yes Yes Yes Yes
PIP Image/Window
Size and Position
Yes
Preset Name Yes Yes Yes
Main Input Yes*
PIP Input Yes*
Film Mode Yes
Presets Available 16 per input
channel
128 global 16 global 32 per input channel
Recall location Current input Any input supporting
input type saved in preset
Any input
except input 5
Automatically recalled
based on signal
* PIP presets can be recalled with or without the main and PIP inputs that were active when the preset was saved.
NOTE: “H/V Start” indicates the horizontal and vertical start.
Figure 49. Presets Settings
DVS 605 • Using the Default Web Pages 74