Filter
Top Products
PIP presets
Sixteen global PIP presets are available for the DVS 605. A PIP preset contains settings for
the size and position of PIP. It also contains the main and PIP inputs that were active when
the preset was saved. By default the rst ten PIP presets have settings already associated
with them, but they can be overwritten.
MAIN
MAIN MAIN
MAIN
MAIN MAIN
MAI
NM
AIN
PIPPIP
PIP
PIP
PIP PIP
PIPPIP
MAIN
MAIN
PIP
PIP
910
5
678
1 234
Figure 51. PIP Preset Default Window Locations
To create and save a PIP preset:
1. Click the button of an available input (1 - 4) to use as the PIP input.
2. Adjust the picture, size, and position settings as desired for the main and PIP windows.
3. From the Preset Number drop-down list in the PIP Presets section, select a number.
4. In the Preset Name field, enter a name for the PIP preset.
NOTE: PIP preset names have a 16-character limit.
5. Click Save.
6. Click Yes to overwrite the previous PIP preset.
The settings are saved to the PIP preset location to be recalled at a later time.
To recall a PIP preset:
1. From the Preset Number drop-down list select the preset to recall.
2. Click Recall to open a drop-down list from which to select either;
a. Recall: Input, Size & Position (recalls main and PIP inputs as well as
size and position settings of main and PIP windows), or;
b. Recall: Size & Position Only (recalls only size and position settings of
main and PIP windows).
A confirmation dialog box opens.
3. In the dialog box, click Yes.
NOTE: Recalling a preset overwrites any adjustments to the current PIP settings.
DVS 605 • Using the Default Web Pages 78