Filter
Top Products
88 Chapter 4
Making Measurements
Basic Measurements
Basic Measurements
Basic measurements are useful for making measurements that are not
specified in measurement standards, and will be useful if you need to
troubleshoot a measurement operation. In addition, having spectrum
and waveform measurements available independently of personality
modes provides extra flexibility.
To access the Basic mode press the
Mode key and select the Basic
softkey. The following measurements are then available by pressing the
Measure key:
“Making the Spectrum (Frequency Domain) Measurement” on
page 97.
“Making the Waveform (Time Domain) Measurement” on page 110.
“Making the Adjacent Channel Power (ACP) Measurement” on
page 122.
“Making the Channel Power Measurement” on page 131.
“Making the Power Stat CCDF Measurement” on page 136.
When you press the key to select the measurement it will become the
active measurement, using settings and a display unique to that
measurement. Data acquisitions will automatically begin provided
trigger requirements, if any, are met.