Agilent Technologies E4406A Satellite Radio User Manual


 
60 Chapter 2
Using System Features
Key Locations
Return Front Panel
RF Input/Input Port/
Align RF System/Alignments/Align Subsystem/
RF Burst Mode Setup/ Trigger/
RF Envelope View/Trace/
Note: This feature is used when measurement is set to
waveform.
RF Envelope Marker/Trace/
Note: This feature is used when measurement is set to
waveform.
RF Inp Level System/Alignments/Align Subsystem/ Align 50 MHz Reference/
Save Front Panel
Save State File/ or Save/
Scale Coupling AMPLITUDE/Y Scale/ for spectrum or waveform - or -
SPAN/XScale/ for waveform.
Scale/Div AMPLITUDE/Y Scale/ for spectrum or waveform - or -
SPAN/XScale/ for waveform.
SCPI LAN System/Config I/O/
Search Front Panel
Select Marker/
Sensors MODE/Service/
Server System/Config I/O/ SICL Server
Service MODE/
Service Password System/More(1 of 3)/Show System/
Shape Marker/More (1 of 2)/
Short Meas Setup/More(1 of 2)/ Advanced/More (1 of 2)/Data Packing/
Show Errors System/
Show System System/More(1 of 3)/
SICL Server System/Config I/O/
Signal Amptd Input/IF Align Signal/
Signal Rate Input/IF Align Signal/
Signal Type Input/IF Align Signal/
Table 2-1 Key Access Locations
Key Key Access Path