Filter
Top Products
Chapter 2 73
Using System Features
Using System Configuration and Alignment Keys
Using System Configuration and Alignment
Keys
There are number of different keys that can help you with
understanding the current instrument configuration and for hardware
alignment.
NOTE Some features are intended for use only by service personnel and
cannot be accessed without a service password. If after pressing a key a
message appears requesting entry of a password, you should
understand this to indicate that this feature is meant for service use
only. The password is not available unless the user has purchased the
service guide.
Restore System Defaults
Press System, More (1 of 3), More (2 of 3) to access the Restore Sys Defaults
key. There are some instrument functions that stay set to the last value
that you selected even if you press the instrument preset key or turn
the power off and on. The
Restore Sys Defaults key allows you to preset
those functions back to the original factory settings.
NOTE Pressing this key will preset functions like the GPIB/IP address,
external reference/trigger settings and auto-alignment selection. You
will have to reset these items to return to the your previous setup.
Show Errors
Press System, Show Errors to activate a menu with features that
enable you to move around in the error history queue, and to clear the
error queue.
Front Panel Key Level 1 Level 2
System Show Errors Top Page
Last Page
Next Page
Prev Page
Clear Error Queue(s
)
Verbose