Filter
Top Products
40 Chapter 1
Getting Started
Installing Optional Measurement Personalities
NOTE Using the Uninstall key does not remove the personality from the
instrument memory, and does not free memory to be available to install
another option. If you need to free memory to install another option,
refer to the instructions for loading firmware updates located at the
URL: www.agilent.com/find/vsa/.
1. Press
System, More(1 of 3), More(2 of 3), Uninstall, Choose Option.
Pressing the
Choose Option key will activate the alpha editor menu.
Use the alpha editor to enter the letters (upper-case) and the
front-panel numeric keyboard to enter the digits (if required) for the
option, then press the
Done key. As you enter the option, you will see
your entry in the active function area of the display.
2. Press the
Uninstall Now key after you have entered the personality
option. Press the
Yes key if you want to continue the uninstall
process. Press the
No key to cancel the uninstall process.
3. Cycle the instrument power off and then on to complete the uninstall
process.