Agilent Technologies E4406A Satellite Radio User Manual


 
Chapter 6 191
Options and Accessories
Accessories
Accessories
AC Probe
The HP/Agilent 85024A high frequency probe performs in-circuit
measurements without adversely loading the circuit under test. The
probe has an input capacitance of 0.7 pF shunted by 1 M
of resistance
and operates over a frequency range of 300 kHz to 3 GHz. High probe
sensitivity and low distortion levels allow measurements to be made
while taking advantage of the full dynamic range of the instrument.
The HP/Agilent 41800A low frequency probe has a low input
capacitance and a frequency range of 5 Hz to 500 MHz.
Broadband Preamplifiers and Power Amplifiers
Preamplifiers and power amplifiers can be used with your instrument
to enhance measurements of very low-level signals.
The HP/Agilent 10855A preamplifier provides a minimum of 22 dB
gain from 2 MHz to 1300 MHz. (Power is supplied by the transmitter
testers probe power output.)
The HP/Agilent 8447D preamplifier provides a minimum of 25 dB
gain from 100 kHz to 1.3 GHz.
The HP/Agilent 87405A preamplifier provides a minimum of 22 dB
gain from 10 MHz to 3 GHz. (Power is supplied by the instrument
probe power output.)
GPIB Cable
The HP/Agilent 10833 GPIB cables interconnect GPIB devices and are
available in four different lengths. GPIB cables are used to connect
printers and controllers to an instrument.
Parallel Interface Cable
The HP 92284A parallel interface cable is a 36-pin to 25-pin
male-to-male 2 meter cable used to connect supported printers to an
instrument.
Printer
The DeskJet personal printers provide black and white or color printing
for another form of permanent records of your test results. The
HP LaserJet series printers are also compatible.