![](http://pdfasset.owneriq.net/4/5f/45f52bb7-1a38-4cc3-9abc-b34a346251d5/45f52bb7-1a38-4cc3-9abc-b34a346251d5-bg3d.png)
Chapter 2 61
Using System Features
Key Locations
Slope Mode Setup/Trigger/Ext Front
Slope Mode Setup/Trigger/Ext Rear/
Slope Mode Setup/Trigger/RF Burst/
Slope Mode Setup/Trigger/Video/
Socket Port System/Config I/O/ SCPI Lan
Span Meas Setup/
SPAN/
X Scale
Front Panel
Spectrum View/Trace/
Note: This feature is used when measurement is set to spectrum.
Spectrum Marker/Trace/
Note: This feature is used when measurement is set to spectrum.
Spectrum Avg Marker/Trace/
Note: This feature is used when measurement is set to spectrum.
Spectrum
(Freq Domain)
MODE/Service/
Spectrum
(Freq Domain)
MODE/Basic/
Store Abs Ampl to
EEROM
System/Alignments/Align Subsystem/ Align 50 MHz Reference/
Subnet Mask
System/Config I/O
Sweep Time Meas Setup/ Can be accessed when measure is set to waveform.
System Front Panel
Telnet Port System/Config I/O/ SCPI Lan
Timebase Freq MODE/Service/
Trace Marker/
Trace Display View/Trace/
Trigger Mode Setup/
Note: This feature is used when measurement is set to either
spectrum or waveform.
Trig Holdoff Mode Setup/ Trigger/
Note: This feature is used when measurement is set to either
spectrum or waveform.
Table 2-1 Key Access Locations
Key Key Access Path