Filter
Top Products
24 Chapter 1
Getting Started
Front Panel Description
Front Panel Description
Key menus may vary depending on the currently selected mode or
measurement. Softkeys which are not available for use are greyed-out.
Keys may be greyed-out as a result of:
the current setting of other inter-related functions,
not having a required password or license key, or
not having some piece of optional hardware that is required.
Paths to access any feature will be found in the key access table on
page 53. Display annotation is explained on page 33. Operation of the
3.5 inch floppy-drive is covered in the section on printing on page 63.
1. ESC key Use the escape key to exit any function without
modifying current parameters. Pressing the
ESC key
will:
• Clear any numeric entry that you have begun to
enter but decided you want to cancel.
• Remove any entries that are visible in the active
function area of the display (see the section on
annotation on page 33 for a description of the active
function area and other display features).
• Cancels an alignment if one is in progress.
2. Control keys
Sets parameters that are used by the measurement in
the current measurement mode.