Agilent Technologies E4406A Satellite Radio User Manual


 
Chapter 2 57
Using System Features
Key Locations
IF Align Signal Input/
Image Print Setup/Print to File
Instrument Name System/Config I/O/ SICL Server
Instrument Logical
Unit
System/Config I/O/ SICL Server
Input Front Panel
Input Atten Input/
Input Port Input/
Install System/More(1 of 3)/ More(2 of 3)/
Install Now System/ More (1 of 3)/ More (2 of 3)/ Install/
IP Address System/Config I/O/
I/Q Input Z Input/
I/Q Waveform Marker/Trace/
Note: This feature is used when measurement is set to either
spectrum or waveform.
K-B 70 dB Meas Setup/More(1 of 2)/ Advanced / FFT Window/More(1 of 2)/
K-B 90 dB Meas Setup/More(1 of 2)/ Advanced / FFT Window/More(1 of 2)/
K-B 110 dB Meas Setup/More(1 of 2)/ Advanced / FFT Window/More(1 of 2)/
Landscape Print Setup/Print To: Printer/Printer Type: Custom/Orientation
Language Print Setup/Print To: Printer/Printer Type: Custom/Define
Custom
Length Ctrl Meas Setup/More(1 of 2)/ Advanced/FFT Size/
Note: This feature is used when measurement is set to spectrum.
Level Mode Setup/Trigger/Ext Front/
Level Mode Setup/Trigger/Ext Rear/
License Key System/ More (1 of 3)/ More (2 of 3)/ Install/
Line Meas Setup/ Trig Source/
Load State File/
Local
(System) Note: Press the front panel System key to change from remote to
local control of the instrument
Log-Pwr Avg Meas Setup/Average/Avg Type/
Table 2-1 Key Access Locations
Key Key Access Path