Filter
Top Products
36 Chapter 1
Getting Started
Installing Optional Measurement Personalities
Installing Optional Measurement
Personalities
When you install a measurement personality, follow this process.
1. Install the measurement personality firmware into the instrument.
(See the supplied installation instructions.)
2. Enter a license key number that enables the measurement
personality. (Refer to the “License Key Numbers” section below.)
Adding additional measurement personalities requires purchasing a
retrofit kit for the desired option. The retrofit kit contains the
measurement personality firmware. A license key certificate is also
included in the kit. It documents the license key number that is for your
specific option and instrument serial number. Installation instructions
are included with the retrofit kit.
Available Personality Options
The option designation consists of three characters, as shown in the
Option column of the table below.
Available Personality Options
a
Option
GSM measurement personality BAH
EDGE (with GSM) measurement personality
b
202
cdmaOne measurement personality BAC
NADC, PDC measurement personalities BAE
iDEN measurement personality HN1
W-CDMA measurement personality BAF
cdma2000 measurement personality B78
a. Available as of the print date of this guide.
b. For instruments that already have Option BAH licensed, order
E4406AU Option 252 to add EDGE (with GSM).