Chapter 4 137
Making Measurements
Making the Power Stat CCDF Measurement
Making the Measurement
NOTE The factory default settings provide a good starting point. For special
requirements, you may need to change some of the settings. Press
Meas
Setup
, More (1 of 2), Restore Meas Defaults at any time to return all
parameters for the current measurement to their default settings.
Select the desired center frequency as described in “Selecting the
Frequency/Channel” on page 86.
Press
Measure, Power Stat CCDF to immediately make a power statistics
CCDF measurement.
To change any of the measurement parameters from the factory default
values, refer to “Changing the Measurement Setup” on page 138.
Results
The next figure shows an example result of Power Stat CCDF
measurements in the graph window. The average power and its
probability are shown in the text window.
Figure 4-13 Power Statistics CCDF Measurement