Filter
Top Products
Chapter 4 117
Making Measurements
Making the Waveform (Time Domain) Measurement
• I/Q Waveform - Provides a view of the I/Q waveform graph in
parameters of voltage versus time in the linear graticules. Changes
to sweep time or resolution bandwidth will sometimes affect data
acquisition.
Figure 4-8 Waveform Measurement - I/Q Waveform View
*Meas Setup: View/Trace = I/Q Waveform View
Others = Factory default settings
*Input signal in this example: cdma2000 Rev 8, SR1, 9 Channel
NOTE For the widest spans the I/Q Waveform window becomes just “ADC time
domain samples”, because the I/Q down-conversion is no longer in
effect.