Filter
Top Products
52 Chapter 2
Using System Features
Using System Keys
Using System Keys
System features are accessed through the System front panel key. These
are features that are not dependent on the currently selected
application mode or the particular measurement being made. They
apply to all modes and measurements.
The
System key also performs the LOCAL function. If the instrument
was previously being controlled remotely by a computer, pressing the
System key will reactivate the front panel keys.
Print feature keys are accessed through the front panel Print Setup and
Print keys, which are explained on page 63.
File feature keys are accessed through the File and Save menu keys,
which are explained on page 67.
Each description of a system feature begins with a table that shows the
key path for all keys related to that feature.
NOTE Most of the system features are not affected by pressing the Preset key
or by cycling the instrument power. These features will retain the last
value set by the user. Press
System, More, Restore Sys Defaults, Yes to
reset the System parameters back to the factory defaults.
Install and Uninstall
The Install and Uninstall keys, which enable you to install and remove
measurement personalities, are described separately on page 36 of the
Getting Started chapter.