Filter
Top Products
Chapter 7 Menus
99
7-3 Extended Menu
258
LIVE LOGGING
Enable or disable the live logging function when using the PDZ-1 Proxy
Browsing Software.
off
: Disable.
on: Enable.
Note
During live logging, regardless of the settings of the switches (INT/EXT/
RP188, PRESET/REGEN, and F-RUN/R-RUN) in the time data settings
section, the internal time code generator always runs in free run mode.
Time code cannot be recorded in internal preset mode.
Menu items in the 200s, relating to the remote control interface
Item number Item name Settings
Menu items in the 300s, relating to editing operations
Item number Item name Settings
308 SELECTION OF STD/NON-STD
FOR COMPOSITE VIDEO IN
Select the STD or NON-STD mode in accordance with a composite
video or S-video input.
STD (forced STD)
: The STD mode is always used (forced STD mode).
N-STD (forced non-STD): Use this setting when the input video signal is
unstable (forced NON-STD mode).
Note
When using a VCR with no built-in time base corrector (e.g. a home-use
VHS-system VCR), select N-STD.
310 REC INHIBIT Select whether recording is inhibited.
off
: Do not inhibit recording.
on: Inhibit recording.
320 DIGITAL AUDIO PB PROCESS ON
EDIT POINT
Select the treatment of audio playback at edit points.
cut: Carry out a cut (possibly resulting in audio discontinuities at the edit
point).
fade
: Fade out and fade in.
335 OUTPUT REFERENCE SEL Select the reference signal of this unit.
ref (ref. video)
: Use the signal input to the REF VIDEO IN connector as
the reference signal.
auto: According to the operation mode, automatically select either the
signal input to the REF VIDEO IN connector or the input video signal
selected with the VIDEO INPUT SEL button as the reference signal.
For more details, see the following item “External synchronization to
reference signal generators” (page 100).
The input digital audio signals and video signals must be synchronized
with the reference signal input to the REF VIDEO IN connector.