Filter
Top Products
Chapter 7 Menus
91
7-2 Basic Setup Menu
006 LOCAL FUNCTION ENABLE Determine which recording and playback control buttons on the control
panel are enabled when this unit is controlled from external equipment.
dis (all disable): All buttons and switches are disabled.
st&ej (stop & eject)
: Only the STOP button and EJECT button are enabled.
ena (all enable): All buttons and switches are enabled.
007 TAPE TIMER DISPLAY Determine whether to display the counter in 12-hour mode or 24-hour mode.
+ –12H (+ /–12H)
: 12-hour mode
24H: 24-hour mode
009 CHARACTER TYPE Determine the type of characters such as time code displayed on the
monitor.
a)
white: White letters on a black background.
black: Black letters on a white background.
W/out: White letters with black outline.
B/out: Black letters with white outline.
a)Video panel and external monitor (when the input signals to the monitor are the
video signals output from the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER)
connector)
Set this item by selecting the required type while viewing the monitor.
011 CHARACTER V-SIZE Determine the vertical size of characters such as time code displayed on the
monitor.
a)
:Standard size
×2 :2 times standard size
a)Video panel and external monitor (when the input signals to the monitor are the
video signals output from the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER)
connector)
Set this item by selecting the required size while viewing the monitor.
012 CONDITION DISPLAY ON
VIDEO MONITOR
Select whether to display disc condition marks on the monitor.
a)
dis (disable): Do not display.
ena (enable): Display.
a)Video panel and external monitor (when the input signals to the monitor are the
video signals output from the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER)
connector)
013 525/625 SYSTEM SELECT Specify whether to enable switching between 525(U) line, 525(J) line and
625 line modes.
off
: Do not enable system switching.
on: Enable system switching.
For the switching between 525(U)/525(J)/625 line modes, see page 95.
Note
When you switch line modes, all basic menu and extended menu items are
set to the factory defaults for the selected line mode.
015 LCD CHARACTER TYPE
Specify the type of characters used to display information on the monitor
a)
when the STATUS button is pressed.
W/out
: White letters with black outline.
white: White letters on a black background.
a)Video panel and external monitor (when the input signals to the monitor are the
video signals output from the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER)
connector)
Set this item by selecting the required type while viewing the monitor.
Item number Item name Settings
×
1