Filter
Top Products
Chapter 7 Menus
93
7-2 Basic Setup Menu
a) This is supported from firmware version 1.5.
035 CLIP TITLE NAMING SELECT Specify whether or not to allow user definition of the titles assigned to clips.
off: Do not allow assignment.
on: Allow assignment.
See 6-1-3 “Assigning User-Defined Clip Titles” (page 75) for more
information about assigning titles.
Sub-item
1 TITLE Specify whether to assign titles to recorded clips.
disable
: Do not assign titles to clips.
enable: Assign titles to clips.
2 PREFIX Set the prefix of the title (up to 10 characters). The allowable characters are
alphanumeric characters, symbols (! # $ % & ' ( ) + , - . ; = @ [ ] ^ _ { } ~), and
the space character.
TITLE
3 NUMERIC Set the initial value of the numeric part of the title (00001 to 99999, five-digit
number).
00001
036 FILE NAMING
a)
Specify whether to allow use of clip and clip list files with user-defined
names.
See 6-1-4 “Assigning User-Defined Clip and Clip List Names” (page 76) for
details about how to make the settings.
Sub-item
1 NAMING FORM Specify the clip and clip list naming format. (Specify whether to allow use of
files with user-defined names.)
C****
: Standard format (Do not allow use of files with user-defined names)
free: Free format (Allow use of files with user-defined names)
2 AUTO NAMING When “free” is selected under the sub-item “NAMING FORM,” specify
whether to use the standard format name or the same name as the title for
clips recorded on this unit.
C****
: Use the standard format for clip names.
title: Use the title set in basic menu item 035 “CLIP TITLE NAMING
SELECT” for clip names.
B01 RECALL SETUP BANK-1 Set to “on” to recall menu settings from menu bank 1.
B02 RECALL SETUP BANK-2 Set to “on” to recall menu settings from menu bank 2.
B03 RECALL SETUP BANK-3 Set to “on” to recall menu settings from menu bank 3.
B11 SAVE SETUP BANK-1 Set to “on” to save current menu settings to menu bank 1.
B12 SAVE SETUP BANK-2 Set to “on” to save current menu settings to menu bank 2.
B13 SAVE SETUP BANK-3 Set to “on” to save current menu settings to menu bank 3.
B20 RESET SETUP MENU Set to “on” to return the settings of the current menu to the factory default
settings. Set to “bank-4” to set the current menu to the settings saved in
menu bank 4.
off
on (on (default)): Return the current menu to the factory default settings.
bank-4: Set the current menu to the settings saved in menu bank 4.
Item number Item name Settings