Filter
Top Products
Chapter 7 Menus
104
7-3 Extended Menu
703 BLANK LINE SELECT Switch blanking of the video output signal on or off for individual lines in the
vertical blanking interval.
The Y/C signal and odd/even fields are blanked simultaneously.
Sub-item
1ALL LINE - - -
: Specify the blanking for each line separately.
blnk (blank): Regardless of the setting of other sub-items, blank all lines
which can be specified in this menu item.
thru (throu): Regardless of the setting of other sub-items, switch off blanking
for all lines which can be specified in this menu item.
2 ...
9
LINE 12 ...
LINE 19
In 525(U) line
mode
Specify blanking for lines 12 to 19.
blnk (blank)
: Carry out blanking.
thru (throu): Switch off blanking.
10 LINE 20 Specify blanking for line 20.
blnk (blank)
: Carry out blanking.
half: Carry out half-blanking.
thru (throu): Switch off blanking.
2 ...
10
LINE 12 ...
LINE 20
In 525(J) line
mode
Specify blanking for lines 12 to 20.
blnk (blank)
: Carry out blanking.
thru (throu): Switch off blanking.
11 LINE 21 Specify blanking for line 21.
blnk (blank)
: Carry out blanking.
half: Carry out half-blanking.
thru (throu): Switch off blanking.
2 ...
15
LINE 9, 322
... LINE 22,
335
In 625 line
mode
Specify blanking for lines 9, 322 to 22, 335.
blnk (blank)
: Carry out blanking.
thru (throu): Switch off blanking.
16 LINE 23 Specify blanking for line 23.
half
: Carry out half-blanking.
thru (throu): Switch off blanking.
705 EDGE SUBCARRIER REDUCER
MODE
Select whether to enable the edge subcarrier reducer (ESR).
on: Enable.
off
: Do not enable.
When playing back a composite signal, set this to “on.”
707 FORCED VERTICAL
INTERPOLATION OFF
The “Y-add” function is normally switched on automatically during jog or
variable speed playback. This item selects whether or not to force the “Y-add”
function off.
auto
: Automatically switch the “Y-add” function on.
off (forced YADD off): Force the “Y-add” function off.
The “Y-add” function is off while a disc image is displayed in stop mode (menu
item 108 “AUTO EE SELECT” is “off”).
The “Y-add” function is a circuit operation to interpolate the video signal
vertically during jog or variable speed playback for the purpose of reducing
the vertical movement of the playback picture.
710 INTERNAL VIDEO SIGNAL
GENERATOR
Select the test signal to be output from the internal test signal generator.
When “SG” is selected using the VIDEO INPUT SEL button, the internal test
signal generator operates to output the selected test signal. This signal can
also be recorded.
BB (Black Burst): Black burst signal
CB75 (75% Color Bars): 75% color bar signal
CB100 (100% Color Bars): 100% color bar signal
The factory default settings for each line mode are as follows:
In 525(U)/525(J) line modes: CB75 (75% Color Bars)
In 625 line mode: CB100 (100% Color Bars)
Menu items in the 700s, relating to video control
Item
number
Item name Settings