Filter
Top Products
Chapter 5 Scene Selection
65
5-2 Creating Clip Lists
5-2-3 Trimming Sub Clips
1
Carry out steps 1 to 4 of 5-2-2 “Reordering Sub Clips”
to select a sub clip and display the sub clip operation
menu.
2
Use the F or f button to select TRIM, and then press
the SET button.
The first frame of the selected sub clip appears. The
first and last frames are set as provisional In and Out
points, and the IN and OUT indicators light.
In this state, you can play back and search the entire
disc.
To cancel the trim and return to the previous
screen
With the SHIFT button held down, press the SET
button.
3
Play back and search the disc to find scenes to set new
In and Out points.
4
At the scene where you want to set a new In or Out
point, hold down the G/IN button (to change the In
point) or the g/OUT button (to change the Out point)
and press the SET button.
Depending on the button that you pressed, a new In or
Out point is set.
To change both the In and Out points
Carry out steps 3 and 4 for both the In and Out points.
To reset the In or Out point
With the G/IN button or g/OUT button held down,
press the RESET button. The In or Out point is
restored to the value it had before the sub clip trim
screen opened.
To cue up the In or Out point
With the G/IN button held down, press the PREV
button. Or with the the g/OUT button held down, press
the NEXT button.
Note Note
You can escape from the sub clip trim screen to full-
screen display without executing a trim if you press the
THUMBNAIL button.
5
Once you have set the new In point or Out point, hold
down the SHIFT button and press the SET button.
The trim is executed, and you return to the sub clip
thumbnail display.
To cancel the trim
Reset the In or Out point to the value it had before you
entered the sub clip trim screen, and then hold down
the SHIFT button and press the SET button.
6
Save the current clip list to disc.
See 5-2-6 “Saving the Current Clip List to Disc” (page
66).
ACCESS
SHUTTLE JOG
THUMB
NAIL
ESSENCE
MARK
MENU
S.SEL
SET
RESET
SHIFT
TOP F REV
ALL/CH-1 CH-2 CH-3 CH-4
TC
F FWD
AUDI O
END
REC
PRESET
VARIABLE
PB
PREV NEXTPLAY STOP REC
CLIP
MENU
SYSTEM
MENU
MONITOR
SEL
METER
SEL
HOLD
COUNTER
SEL
SUB
CLIP
MARK1
MARK2
IN
OUT
KEY INHI
ON
OFF
NETWORK
LOCAL
REMOTE
F-RUN
R-RUN
PRESET
REGEN
INT
EXT
RP188
L/ST/R
THUMBNAIL button
SET button
SHIFT button
RESET button
PREV button
NEXT button
G/IN button
F/f buttons
g/OUT button
Jog dial