Filter
Top Products
Appendixes
132
Specifications
±1 times normal speed
Shuttle mode
±20 times normal speed
Video performance
Sampling frequency
Y: 13.5 MHz, R–Y/B–Y: 6.75 MHz
Quantization 10 bits/sample
Analog composite input to analog composite output
Bandwidth: 30 Hz to 4.5 MHz +0.5/–1.5
dB (NTSC), 25 Hz to 5.5 MHz +0.5/–
1.5 dB (PAL)
S/N ratio: 53 dB or more
Differential gain: 2% or less
Differential phase: 2° or less
Y/C delay: 20 ns or less
K-factor (2T pulse): 2% or less
Processor adjustment range
Video level –∞ to +3 dB
Chroma level –∞ to +3 dB
Set up/black level
±30 IRE/±210 mV
Chroma phase/hue
±30°
System sync phase
±3 µs
System SC phase
±200 ns
Audio performance
Frequency response
20 Hz to 20 kHz +0.5/–1.0 dB (0 dB at 1
kHz)
Dynamic range More than 90 dB
Distortion Less than 0.05% (at 1kHz)
Head room 20/18/16/12 dB (Selectable with menu)
Input connectors
Digital signal inputs
SDI IN BNC type (×1)
SDI format (270 Mbps), SMPTE 259M/
CCIR656-III
DIGITAL AUDIO (AES/EBU) IN 1/2, 3/4
BNC type (×2), complying with AES-
3id-1995
S400 (i.LINK)
6-pin (×1), complying with IEEE 1394
Analog video inputs
REF VIDEO IN
BNC type (×1)
Black burst
0.286 V (NTSC), 0.3V (PAL), 75 Ω,
negative sync
Composite sync
VIDEO IN BNC type (×1), composite
1.0 Vp-p, 75 Ω, negative sync
Analog audio inputs
AUDIO IN 1/3, 2/4
XLR 3-pin, female (×2), +4/0/–3/–6 dBu
(selectable with menu), 10 kΩ,
balanced
Time code input
TC IN BNC type (×1), SMPTE time code, 0.5
Vp-p to 18 Vp-p, 3.3 kΩ, unbalanced
(network)
100Base-TX/10Base-T
RJ-45 type (×1)
100BASE-TX: complying with IEEE
802.3u
10BASE-T: complying with IEEE 802.3
Output connectors
Digital signal outputs
SDI OUT (SUPER)
BNC type (×1)
SDI format (270 Mbps), SMPTE 259M/
CCIR656-III
DIGITAL AUDIO (AES/EBU) OUT 1/2, 3/4
BNC type (×2), complying with AES-
3id-1995
S400 (i.LINK)
6-pin (×1), complying with IEEE 1394
Analog video outputs
VIDEO OUT 1, 2(SUPER)
BNC type (×2), composite, 1.0 Vp-p,
75 Ω, sync negative
Analog audio outputs
AUDIO OUT 1/3, 2/4
XLR 3-pin, male (×2), +4/0/–3/–6 dBu
(selectable with menu), 600 Ω loading,
low impedance, balanced
Output for headphones
PHONES JM-60 Stereo phone jack (×1), –∞ to –13
dBu, 8 Ω, unbalanced
Time code output
TC OUT BNC type (×1), SMPTE time code, 2.2
Vp-p ±3 dB, 600 Ω, unbalanced
Remote control connectors
REMOTE D-sub 9-pin (×1), for connection of
editing control unit, RS-422A standard