Filter
Top Products
96
Message Cause and countermeasure
Smart Space
Text Protect
TOC Reading
TOC writing
Track End
Tuner (Radio)
Message Cause and countermeasure
OFF TIME NG !
CD
Message Cause and countermeasure
Check and CD 1
(or 2 – 5) Position
appear alternately
Complete!!
File Full
No Disc
—OVER—
You have set the start time and the end time for timer recording to the same time.
m Reset the times so that they are different. (pages 64 and 67)
The disc could not be read properly.
m Insert the disc whose number is displayed again.
CD editing (Disc Memo) finished normally.
m —
There is no more space to store disc titles (you have already input 100 disc titles).
m Erase unnecessary disc titles, then input the disc title again (see page 31).
There is no disc in the CD player.
m —
You have reached the end of the disc while pressing ).
m Keep pressing 0 or turn MULTI JOG to return to the desired playing
position.
Silence continued for 3 or more but less than 30 seconds during digital recording,
so the Smart Space function activated to replace the silence with a blank of about
3 seconds.
m If you do not want to shorten the space between tracks, turn off the Smart Space
function (see page 44).
There is information in the CD text that cannot be recorded on an MD.
m Press NAME EDIT/CHARACTER and then ENTER/YES to record the title of
the current track.
The deck is reading the MD Table of Contents (TOC).
m Wait until “TOC Reading” disappears.
Do not move the deck until “TOC Reading” disappears to ensure proper
reading.
The MD Table of Contents (TOC) is being updated.
m Wait until “TOC writing” disappears.
Do not move the deck until “TOC writing” disappears to ensure the complete
recording or editing.
You have reached the end of the disc while adjusting the position to be divided by
the Divide Function.
m Change the position (see page 58).
Display messages (continued)