Filter
Top Products
85
Additional Information
Troubleshooting
The volume is too low.
m Turn VOLUME clockwise.
The headphones are connected.
m Unplug the headphones.
The speakers are not connected properly.
m Connect the speaker cords properly (see page 5).
A 3-digit code and a message are flashing alternately in
the display
Yes
Yes
No
No
A message appears in the display
If you run into any problem using this stereo system, check it according to the procedure
described below.
General
Symptom Cause and countermeasure
There is no sound.
Refer to Display
messages (page 94)
Refer to the Self-
diagnosis display
function (page 93)
Refer to the tables below and check the system again. Should any problem
persist, consult your nearest Sony dealer.
continued