Filter
Top Products
95
Additional Information
Message Cause and countermeasure
MD PULL DISC
MD RE-INSERT!
Name Full !!
New Track
No Disc
No Name
No Track
—OVER—
Premastered
Program Clear!
Push STOP !
–Rehearsal–
Release
There is already an MD loaded in the MD recording/playing unit, but there are 5
MDs in the slots so the loaded MD cannot be removed.
m Remove an MD from a slot.
The transport cartridge is still inserted.
m Turn off the system and wait for the mechanism to come to a complete stop,
then remove the cartridge.
The MD was inserted in the slot in the wrong direction.
m Turn off the system and wait for the mechanism to come to a complete stop,
then remove the MD.
The MD is not inserted completely.
m Remove the MD and then reinsert it to the correct position (until it stops).
The MD is not inserted to the correct position.
m Reinsert the MD. If the MD deck still does not operate, turn the system off and
then on again. After you press the power button, the MD is ejected to the slot
and the system turns off. If the MD is not ejected to the slot, consult your
nearest Sony dealer.
There is no more space to store disc or track titles (you have already input 1,700
characters).
m Erase unnecessary track titles, then input the title again.
You specified recording on a brand new MD or after the recorded tracks (e.g.
previously unrecorded space).
m —
There is no disc in the MD deck.
m —
You tried to show the title of a non-labeled disc or track.
m You can assign disc and track titles to a recordable MD (see page 52).
The inserted disc has a disc title but no tracks.
m —
You have reached the end of the disc while pressing ) during playing pause.
m Keep pressing 0 or turn MULTI JOG to return to the desired playing
position.
You tried to record on a premastered MD.
m —
You inserted a disc into a slot containing an MD included in a program you made
(whose MD 1 – 5 button lights green), so the entire program was cleared.
m Make the program again.
You pressed PLAY MODE while an MD is playing.
m You cannot change the play mode during play. Press p for the MD to stop play,
then press PLAY MODE.
The portion to be divided by the Divide Function is being played for confirmation.
m Listen to the played contents to confirm the position to be divided (see
page 58).
The system is ejecting the disc.
m —
continued