Filter
Top Products
78
” Other A/V Components
Connecting a tape
deck, VCR, etc.
Connecting the optional
TC-PX100 tape deck
CD Synchro Recording and Timer Recording
are possible when the TAPE CONTROL jacks
are connected.
Refer to the operating instructions included
with the TC-PX100 tape deck for details.
Tip
The
A
and B markings of the TAPE IN/OUT jacks
guide you to connect the optional TC-PX100 tape
deck.
Connecting another tape
deck
Connect the tape deck to the TAPE IN and
OUT jacks on the rear panel of the system.
Insert completely
Not pushed in all the way
N.G.
OK
To enhance your system, you can connect
optional components. Analog sound from the
connected component is recorded as an
analog signal on the MD.
Refer to the operating instructions of each
component.
Connecting the audio cords (not
supplied)
When using audio cords (not supplied) to
connect other AV components to the system,
make sure to insert the plugs firmly, pushing
them in all the way. No sound will be
produced if the plugs are not inserted
securely.
A
B
Tape deck
To the audio
input of a
tape deck
To the audio
output of a
tape deck
TAPE IN
jacks
TAPE OUT
jacks
TAPE CONTROL jack
A
B
A
B