Filter
Top Products
60
1 Press FUNCTION repeatedly to
switch the function to MD.
2 Press MD D.SKIP on the remote
repeatedly until the button of the
desired MD lights green.
If the MD appears in the slot, press 6 to
load the MD (to the recording/playing
unit).
3 Press MENU/NO so that
“Edit Menu” appears.
4 Turn MULTI JOG until “Combine ?”
appears, then press ENTER/YES.
5 Turn MULTI JOG until the number
of the first track of the two to be
combined appears, then press
ENTER/YES.
For example, to combine tracks 4 and 1,
select track 4.
6 Turn MULTI JOG until the number
of the second track of the two to be
combined appears.
7 Press ENTER/YES.
“Complete!!” appears for a few seconds
and the combined tracks start playing.
To cancel the Combine Function
Press p for the MD.
To return to the condition before
COMBINE
You can return to the original condition
immediately after combining the tracks (see
the next page). You can also return to the
original condition by using the Divide
Function.
Notes
• If both of the combined tracks have track titles, the
title of the second track is erased.
Example:
• If “Impossible” appears, the tracks cannot be
combined. This sometimes happens when you
have edited the same track many times. This is
due to a technical limitation of the MD system and
is not a mechanical error.
First track
New track number
Track to be combined
12
1
2
3
4
3
The second track
title is erased.
Track
number
Original
tracks
After
COMBINE
Andante Adagio Allegro
Andante Adagio
Combining recorded tracks
(continued)