Filter
Top Products
6
Step 1: Hooking up the system
(continued)
Plastic stand
Antenna
The antenna is the proper shape
and length for receiving AM radio
waves, so do not remove or roll up
the antenna.
A
B
2
Connect the AM antenna.
Structure of the supplied AM
antenna
To set up the AM antenna
1 Remove only the twisted portion
( ) of the antenna from the
plastic stand.
2 Set up the stand.
Open the stand,
and fit the antenna into the
groove.
To connect the AM antenna
1 Insert the antenna cord into the AM
antenna terminals.
2 Pull gently on the antenna cord to
make sure it is connected correctly.
If the antenna cord pulls out, connect
it again.
3
Connect the FM antenna.
Structure of the supplied FM
lead antenna
A : The antenna cord receives signals
along its entire length, so do not roll
up the cord.
B : Insert this portion into the antenna
terminal.
AM
F
M
7
5Ω
Insert this portion.
A
M
FM 75Ω
COAXIAL
Jack type A
Jack type B
Insert this portion.