Filter
Top Products
Getting Started
7
220-240V
110-120V
VOLTAGE SELECTOR
continued
To connect the FM antenna
1 Insert the antenna cord into the FM
antenna terminal.
2 Pull gently on the antenna cord to
make sure it is connected correctly.
If the antenna cord pulls out, connect
it again.
To extend the FM antenna
Tune in an FM station and fasten the
antenna to a position that provides good
reception.
1/u (power) indicator
4
Adjust the operating voltage (for
models with a voltage selector).
Before connecting the power cord, set
VOLTAGE SELECTOR on the rear panel
to the position of the local power line
voltage.
5
After finishing all speaker and
antenna connections, connect the
power cord to a wall outlet.
Plug Adapter (except for North
American and European models)
If the plug of this system does not fit
your wall outlet, attach the supplied
adapter on to the plug.
When you connect the power cord, only
the 1/u (power) indicator lights red.
To display the clock at this time, see
“Showing the time” on page 9.
AM
FM
7
5
Ω
C
O
A
X
IA
L
Jack type A
Jack type B
AM
FM
75Ω
Insert this
portion.