Filter
Top Products
58
·P
·P
p
p
0)
66666
3 4,5,7
4,5,6
1
MD 1 – 5
0/)
p
Dividing recorded
tracks
— Divide Function
3 Press MENU/NO so that
“Edit Menu” appears.
4 Turn MULTI JOG until “Divide ?”
appears, then press ENTER/YES.
5 Turn MULTI JOG until the desired
track number appears, then press
ENTER/YES.
“–Rehearsal–” appears and the portion
to be divided is played repeatedly.
6 While monitoring the sound, turn
MULTI JOG to find the point to be
divided.
You can shift the point by 1/86 second
(1 frame) intervals.
To shift the point by second or minute
intervals, press 0 or ) so that “s” or
“m” flashes, then turn MULTI JOG.
7 Press ENTER/YES, when the
position is correct.
“Complete!!” appears for a few seconds
and the newly created track begins
playing.
To cancel the Divide Function
Press p for the MD.
Track
number
Original
tracks
After
DIVIDE
Divide track 2 into
tracks B and C.
12
3
123 4
AB C
D
AB C
D
This function lets you mark track numbers
after the recording ends. The total number of
tracks increases by one and all the tracks
following the divided ones are renumbered.
Example: Dividing track 2 into two tracks.
1 Press FUNCTION repeatedly to
switch the function to MD.
2 Press MD D.SKIP on the remote
repeatedly until the button of the
desired MD lights green.
If the MD appears in the slot, press 6 to
load the MD (to the recording/playing
unit).