Filter
Top Products
75
Using Optional Equipment
— MD WALKMAN
0)
66666
Connecting an MD
WALKMAN
1 If the power is on, press 1/u
(power) to turn off this system.
2 Turn off the MD WALKMAN’s
Mega Bass function.
Set the DIGITAL MEGA BASS switch to
“0”, or press DIGITAL MEGA BASS so
that “BASS” disappears from the
display.
3 Turn on the MD WALKMAN’s
AVLS (volume limiting) function.
Set the AVLS switch to “LIMIT” or
“ON”.
4 Play the MD WALKMAN.
5 Press DISPLAY on the MD
WALKMAN repeatedly to display
the playing time and track number
on the remote. (This information
appears on the main unit for the
MZ-R30.)
The MD WALKMAN is designed so that
the playing time and track number
information is output from the remote
jack.
MD WALKMAN
MD WALKMAN
LINK jack
To 2 (headphone)
jack
You can connect a Sony portable MiniDisc
recorder/player “MD WALKMAN” to the
system using the supplied MD WALKMAN
LINK cable.
To use an MD WALKMAN, refer to the
operating instructions for the MD
WALKMAN.
Note
Never connect any components other than those
listed below to the MD WALKMAN LINK jack.
Doing so could result in malfunction.
• Models that can be connected:
Portable MiniDisc recorder:
MZ-R5ST* (Europe only), R50, R30
Portable MiniDisc player:
MZ-E45 (Hong Kong only), E44, E35, E30,
E25, EP11
* Be sure to remove the MD WALKMAN from
the station and connect only the MD
WALKMAN to the system.
• Features:
The system starts recording automatically
in sync with MD WALKMAN play
(synchro recording). The sound from the
MD WALKMAN is recorded as an analog
signal to the MD deck. In addition, if you
use a portable MiniDisc player, you can
copy the track title of the current track and
mark track numbers automatically.
” MD WALKMAN
continued