Filter
Top Products
22
Station name*
Preset number Frequency
2 Press TUNING MODE repeatedly
until “PRESET” appears.
3 Turn MULTI JOG to tune in the
desired preset station.
Or press PRESET (+/–) on the remote.
* The station name is displayed only when
you have assigned a name to the preset
station (see page 69).
To Do this
Turn off the radio Press 1/u (power).
Adjust the volume Turn VOLUME (or press
VOL or on the
remote).
Listening to non-preset
radio stations
• Press TUNING MODE repeatedly until
“MANUAL” appears in step 2, then turn
MULTI JOG to tune in the desired station.
(Manual Tuning)
• Press TUNING MODE repeatedly until
“AUTO” appears in step 2, then turn
MULTI JOG slightly and release it. The
frequency indication changes and scanning
stops when the system tunes in a station.
(Automatic Tuning)
To cancel Automatic Tuning
Press TUNING MODE.
Tips
• You can switch from another source to the tuner
just by pressing TUNER/BAND (or BAND on the
remote) (Automatic Source Selection).
• To improve broadcast reception, reorient or move
the supplied antennas near a window or outdoors.
If broadcast reception does not improve, we
recommend using a commercially available
outdoor antenna (see page 81).
• When an FM stereo program is noisy, press
STEREO/MONO repeatedly until “MONO”
appears. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
Listening to the radio (continued)